Raceway Mounted Channel Letter Signs

Raceway Channel Letter Signs :: Raceway Mounted Channel Letters :: Raceway Channel Letters :: LED Raceway Channel Letters

Raceway Channel Letters are mounted on a 7" x 7" aluminum channel box known as a raceway. This type of signage is eye catching and very easy to read from a distance. The Raceway Mounted Channel Letters contains all electrical components including wiring and transformers needed for the sign to work. The raceway itself is attached to your wall with lag bolts, through bolts or toggle bolts, depending on your type of wall. Your SignWire project manager can consult on your type of installation.

All of the Raceway Channel Letter Signs in this category from SignWire.com carry a U.L. label and disconnect switch, required by most building codes around the country. We'll also paint the mounting system to match your wall color, which helps blend in the mounting with your wall. Just give us your wall color and we'll do the rest. Click here to request a quote or call (800) 922-6189 for more information.

Always check with your building landlord and proper zoning officials for approval before choosing Raceway Mounted Channel Letters versus an individually (remote or flush) mounted set of letters. Costs for purchasing LED Raceway Channel Letters are going to be higher than separate letters. All of the electrical components including transformers are pre-wired inside the rectangular, aluminum box that sets behind the attached letters. On the plus side, a Raceway Mounted set of letters is much easier and cost efficient to install. All that is needed to mount to the wall is the Raceway itself with one set of wiring to be connected to the main circuit. While the same size separate lettering will cost less to purchase, the steps for proper installation can take much longer to complete. Each letter has to be individually mounted on the wall and each letter has to be wired in a series connection.