Flex Post Sign Stands

Flexible Stands :: Sign Stands :: Flexible Posts

SignWire.com has your solution for ongoing sign maintenance problems in areas where signposts are vulnerable to traffic and other hazards. Flexpost's spring assembly allows uniform flexibility when hit from any angle. Even when completely driven over, Flexposts easily return to their original position leaving minimal, if any, scratches on most vehicles. Flexposts are ideal for handicap, fire lane, directional, and special-use signage such as Expectant Mother, Short Term Parking and Loading Zone. Posts can also be painted a custom color for an additional fee.

Tired of this happening to your sign posts?

	Concrete Mounting Solution 9.5"x9.5" E-coated 7 gauge steel square plate, texture powder-coat top finish. Four 1/2" permanent threaded bolts that secure to standard base. Four 1/2" washers, nuts and lock washers. Just pilot drill holes into concrete base approx. 4" deep, using a hammer pound anchors into each hole until threads of anchors are about 1" above surface of concrete. Set base plate through anchors, place washer on each stud, tighten nuts onto anchors.
	Asphalt Mounting Solution 9.5"x9.5" E-coated 7 gauge steel square plate, texture powder-coat top finish with 18" asphalt spike anchor. Four 1/2" permanent threaded bolts that secure to standard base. Four 1/2" washers, nuts and lock washers. Just hammer anchor into ground. Then set standard base on to asphalt base and tighten provided nuts and washers.
	Unpaved Ground Solution 9.5"x9.5" E-coated 7 gauge steel square plate, texture powder-coat top finish with 18" ground anchor with stabilizing support fins. Four 1/2" permanent threaded bolts that secure to standard base. Four 1/2" washers, nuts and lock washers. Just hammer anchor into ground. Then set standard base on to unpaved ground and tighten provided nuts and washers.